Carraro Front Axle Mod. 20.22 Repair Manual for Agrotron 120-130

Description

Carraro Front Axle Mod. 20.22 Repair Manual

The Carraro Front Axle Mod. 20.22 Repair Manual is a comprehensive technical reference for servicing and repairing the front axle used with Agrotron 120-130 applications. The manual identifies the axle as Mod. 20.22 and references Carraro part numbers CA641372-73-74-75, with publication P/N CA357356 and a 2nd edition dated December 2005.

Designed for qualified technicians, maintenance personnel and repair professionals, this manual provides structured information for carrying out axle overhaul and repair operations. The repair procedures are presented sequentially with illustrations and explanations to assist with the correct handling of individual components and assemblies.

Detailed Repair and Service Information

The manual covers the major procedures required when working on the Carraro front axle. Its contents include general technical information, product identification, technical characteristics, oil checks, lubrication, sealants and tightening torque information. The repair section provides detailed procedures for disassembly and assembly of important axle components.

Covered assemblies include the sensor group, steering cylinder group, epicyclic reduction gear, wheel hub, flange, differential support, differential groups, pinion and axle beam. The manual also provides information concerning toe-in and steering angle adjustment and testing after assembly.

Inspection, Troubleshooting and Special Tools

Additional sections address troubleshooting and diagnosis of axle problems, allowing technicians to investigate faults and inspect components for wear or damage. The manual also includes a section covering special tools and a service operations time schedule.

The repair recommendations provide important guidance for handling shaft seals, O-rings, adjusting shims, bearings, elastic pins and sealing compounds. The manual also explains cleaning, oil draining, component inspection and lubricant-use practices. These instructions are particularly useful during complete axle teardown and reassembly.

Safety and Workshop Guidance

Safety information is included throughout the manual. The documentation explains warning and danger symbols, cleaning requirements, adjustment procedures, lubrication points, special-tool references and other repair-related symbols. The manual emphasizes that axle inspection and repair should be performed by qualified technicians familiar with the unit and applicable safety procedures.

The document also explains that the axle is assumed to have already been removed from the vehicle when performing the described repair operations. For vehicle-level axle removal, the manual directs the technician to consult the vehicle manufacturer’s documentation.

Manual Contents

• General information and manual usage
• Safety instructions and precautions
• General specifications and product identification
• Technical characteristics
• Oil change and checks
• Greasing and lubrication information
• Adhesives and sealants
• Tightening torque information
• Sensor group disassembly and assembly
• Steering cylinder group procedures
• Epicyclic reduction gear procedures
• Wheel hub group procedures
• Flange group procedures
• Differential support procedures
• ML and LS differential group procedures
• Pinion group procedures
• Axle beam group procedures
• Toe-in and steering angle adjustment
• Post-assembly testing
• Troubleshooting and axle diagnosis
• Special tools
• Service operation times

Important: The supplied sample identifies this documentation as a Carraro repair manual for Mod. 20.22. Always verify the axle model, reference numbers and application before beginning repair work.