JCB Access Help Files

Fail to Start

Machine > Errors and DTCs > Machine DTCs > Fail to Start

Description Information Service Procedure

Description

If the machine fails to start then no error codes will be displayed

Service Procedure

1. Batteries should be fully charged

2. Battery isolator should be connected

3. Machine key switch should be in ON position (select platform or base controls)

4. Cable to PECU should be fully connected (check connection in hydraulic compartment and at platform)

5. Primary fuse should be connected

6. DC contactor should be connected

7. Emergency stop(s) should be pulled out (check platform and base controls)

8. Charger should not be connected to external power supply & plugs should be connected at the charger

9. Harness should be complete, connected and without damage.

This topic last edited on 08/08/2017