CUMMINS FAULT CODE 235

ADVERTICEMENT


cummins insite keygen



mk:@MSITStore:C:UsersHPDesktopBackupInsiteCummins%20FISF

FAULT CODE 235

Coolant Level – Data Valid But Below Normal Operating Range – Most Severe Level

Overview

CODE

REASON

EFFECT

Fault Code: 235

Coolant Level – Data Valid But Below Normal Operating

Industrial: Calibration dependent progressive derate and

PID:

Range – Most Severe Level. Low engine coolant level

possible engine shutdown with increasing time after alert.

SPN: 111

detected.

FMI: 1

LAMP: Red

SRT:

Coolant Level Sensor 1 Circuit – Industrial Engine

Coolant Level Sensor 1 Circuit – Marine Engines

Coolant Level Sensor 1 Circuit – Power Generation En

Circuit Description

The coolant level sensor 1 monitors the engine coolant level within the coolant system and passes information to the engine control module (ECM) through the original equipment manufacturer (OEM) harness and engine harness.

Component Location

The coolant level sensor 1 is typically located in the radiator top tank or surge tank. Refer to the OEM service manual for location.

Shop Talk

This fault code goes active when the coolant level inside the radiator top tank or surge tank drops below the sensor level. Fill the top tank with coolant. Refer to Troubleshooting Fault Code t05-235.

Last Modified: 28-Nov-2012

Copyright © 2000-2010 Cummins Inc. All rights reserved.